Main Brand
Main Brand
Main Brand

Recent Projects Undertaken by Bollin Rigging

Tension Wire Systems

stairs castle

Chester Cathedral - Cathedral at Height Project 

Working with Calibre Metalwork, Stockport, Bollin Rigging installed specialist "Webnet" infill to Tower, Bell Chamber and Walkways throughout the Cathedral allowing tours of the upper areas to be used in safety by the public.

 Chester Cathedral - Cathedral at Height Project 2014

Yorkshire Sculpture Park -

Bollin Rigging supply and maintain balustrade and rigging wires at this prestigious site.

water front

Chatham Waterfront Development

For this project we were tasked with manufacturing 6mm diameter infill wires to match existing assemblies. We were able to supply and install a large number of wires to an extension of the original development on time and within budget.

interior stairs

Internal Office Block Staircase

Bollin Rigging installed the 5mm diameter tension wires to this extensive project in Warrington.


A small job, but we manufactured and fitted this balustrade to the client's deck within 7 days of their order. We can turn jobs around in a short period should this be required.

Shade Sail Awnings

Shade Sail Awnings

Our client wanted a "nautical" feel to his deck and we designed, supplied, and fitted these sails to imitate the look of a yacht's mainsail and jib.

Canopy Retaining Wires

Canopy Retaining Wires - Blue Planet Aquarium

Working from a cherry picker, we installed these 18mm diameter galvanized wires and turnbuckles to provide further tensioning and security to the tensile fabric canopy covering the entrance.



Bollin Rigging installed this side mounted balcony balustrade to avoid damaging the waterproof deck. Using special brackets and a timber handrail along with our trademark wire infill, we produced a safe and good-looking solution to match our client's requirements.

Garden Step Handrail

Garden Step Handrail

Installed as part of a modernising garden makeover, we fitted the owner's steps with handrails to provide safety with a highly contemporary look.

Decking Handrail/Balustrade with Stainless Steel Wire Infill

Decking Handrail/Balustrade with Stainless Steel Wire Infill

The second phase of our client's garden makeover: We supplied and fitted stainless steel handrails to existing timber posts and fitted decking wires between the posts to provide a highly attractive feature to the garden.

patio balustrade in kit form

Decking Balustrade/Handrail Supplied As Kit

Starting as a kit of machined parts pre-built in our workshops and supplied for the client to install, this balustrade was completed by the owner of the house, who was a competent DIY enthusiast.

london pleasure gardens

London Pleasure Gardens - Part of the 2012 London Olympic site.

Bollin Rigging supplied and installed over 3000 linear met of 5mm infill wire and fittings to the newly installed balustrade on this prestigious site at very short notice. Working closely with the company who supplied and installed the baluster posts and handrail, Bollin Rigging found solutions to enable the project to be a complete success.

Weston Super Mare Seafront

Weston Super Mare Seafront

Bollin Rigging supplied a specially designed 6mm-wire and tensioner system to new stainless steel seafront hand railing. A three-wire system was supplied to over 600m of balustrade.

Bespoke Stair Side Protection Wires

Bespoke Stair Side Protection Wires

Designed by the architect, we implemented this project designing both the system and also the roof and floor steels to attach the wires top and bottom.

Domestic Decking Balustrade

This balustrade was supplied as a kit of machined parts and featured a curved top rail to one section. It was installed by the house owner who was competent at DIY.

Domestic Decking Balustrade

Company Address:

Bollin Associates Ltd

Bollin Barn,
Ridgehill, Sutton,
SK11 0LX

Company No. 04444225

Find Us On Facebook